Need assistance identifying a part

[Vwsaabvt]

Is there a link for that page? I'll just bite the bullet and buy the right

it's a website for shops called repairlink so you can order parts for directly from your local dealers without having to call. You would have to call around to dealers and see who could order for you if they can even get their hands on one.

 

[Desert Sasqwatch]

What scrap yard did your donor go into. Maybe try to find the uprights that left with the carcass?

 

[Rttoys]

it's a website for shops called repairlink so you can order parts for directly from your local dealers without having to call. You would have to call around to dealers and see who could order for you if they can even get their hands on one.

Correct. Even better pricing too using repairlink. Not to mention, I get to look it up, so it’s all my fault if I get it wrong. Haha

 

[Josh's09]

Many of us have been down this road. Maybe you'll get lucky and get the right parts on the first try, but, most outlets don't know the difference between a TC and a non-TC knuckle. It sucks but it's true.

Yall were right, the left knuckle works, but the right (ordered from dorman) was wrong.

 

[Josh's09]

Super noob question here.. But will this guy's steering knuckle fit my 09 SS/TC? Idk what `09 LNF RPD g85` means as far as compatibility

 

[Rauq]

Should. 2009 LNF is an SS/TC which is about all that matters here. G85 is the trans code for an LSD and RPD is the little display screen that was an option on the turbo cars.

 

[Josh's09]

Should. 2009 LNF is an SS/TC which is about all that matters here. G85 is the trans code for an LSD and RPD is the little display screen that was an option on the turbo cars.

Awesome, just trying to confirm online since this is from a guy on marketplace. So I wont get a refund if its the wrong part.

 

[Desert Sasqwatch]

Make sure it's from an '08-'10 SS/TC car if buying from someone. Any other model or earlier years ('05-'07) will not work for your application.

 

[Ark :D]

I concur, that Marketplace knuckle should be the correct one.

 

[Josh's09]

Make sure it's from an '08-'10 SS/TC car if buying from someone. Any other model or earlier years ('05-'07) will not work for your application.

Yes, I asked him specifically. He is parting out multiple vehicles and that is where the confusion was coming from

 

[comegetjoe]

Yes, I asked him specifically. He is parting out multiple vehicles and that is where the confusion was coming from

Measure that ball joint and save yourself some trouble.

 

[Desert Sasqwatch]

Ran that measurement about post #8, but yes the larger ball joint on the TC should match the TC knuckle.