Looks great! Did you powder coat your calipers and your spindles or is that paint? If paint, what did you use?After taking several months off for a variety of reasons the project is finally progressing again. I am considering moving the fuse box location in order to use that space for the turbo. Has anyone done this or know anyone that has?
Thanks! I powder coated them.Looks great! Did you powder coat your calipers and your spindles or is that paint? If paint, what did you use?
Did you blast them first?Thanks! I powder coated them.
YesDid you blast them first?
For a catch canWow that engine is clean. What are the AN fittings in the valve cover for?
I agree. So we’re going to make one.I noticed you have a twin scroll housing? Are you using the ZZperformance manifold? I wish someone would actually make a twin scroll exhaust manifold or a real twin scroll turbine inlet for the cobalt. Would make the 7163 spool so perfect.
Wait what? You guys are going to make one? For the T25 inlet im assuming? If you do could you make 2, cuz i definitely want one with a 7163. Ill give you half up front asap.I agree. So we’re going to make one.
Yes for T25. We may be able to work something out. Once we firgure out the design and know how long it takes to make I’ll let you knowWait what? You guys are going to make one? For the T25 inlet im assuming? If you do could you make 2, cuz i definitely want one with a 7163. Ill give you half up front asap.
All the better to STICK to the track, mon!Chris, rims and tire specs? Those back tires are wwwwwiiiiiiiiiiiiidddddddddddeeeeeeee.
Konig Ampliform wheels with Toyo Proxes R888R tires. 295/30-19 rear and 235/35-17 front per page two of this thread.Chris, rims and tire specs? Those back tires are wwwwwiiiiiiiiiiiiidddddddddddeeeeeeee.
Sure thing, I’ll get some pics of the specifics tonight.Chris, I see you moved the fusebox up front near the battery, what changes did you make to the wire harness to accommodate this? I'm assuming you did this to make room for the large air to water intercooler mounted over the transmission? Can you post some more photos, and maybe some measurements of the brackets you are using of this installation, as I am intending to do the same thing with my own large intercooler in the same location. Thanks.