Dyno Results

[Davidljones88]

The day has finally come and gone for the tune. I wanted to get your opinions on the numbers. Seems low. I'm guessing it's around 300hp at the crank.

LDK 2.0 (stock)
Z54 turbo
Opel injectors
93 octane
240hp
255 torque

 

[Ross]

I wouldn't worry about the numbers, as long as the car is running correctly.

 

[Davidljones88]

I wouldn't worry about the numbers, as long as the car is running correctly.

Great video.

 

[comegetjoe]

That does seem low. Graphs look smooth though!
Is your car tuned?
For comparison, my 09 SS/TC cobalt on a stock K04 with an intake, exhaust and a tune made 280hp and over 300tq

 

[Davidljones88]

That does seem low. Graphs look smooth though!
Is your car tuned?
For comparison, my 09 SS/TC cobalt on a stock K04 with an intake, exhaust and a tune made 280hp and over 300tq

Those were after tune numbers. The guy that tuned it said it rips and was impressed. I guess that should mean something from someone who drives every type of car. I haven't gotten to drive it yet.

 

[Scott Geyer]

That seems low with a ZZP Z54. When ZZP installed there Z54 on mine, they got 335 to the wheels. Whats your boost set at?

 

[Davidljones88]

That seems low with a ZZP Z54. When ZZP installed there Z54 on mine, they got 335 to the wheels. Whats your boost set at?

19 apparently

 

[Gtstorey]

Unless you have done major “breathing “ work to the engine, 19 psi boost is way low. It’s easy to get 24+ on the k04, although it’s not good for the turbo.

 

[Scott Geyer]

That's about what mine is. I'm at 20

 

[Gtstorey]

That's about what mine is. I'm at 20

Has it been tuned?

 

[Davidljones88]

Has it been tuned?

Tuned today.

 

[Gtstorey]

Tuned today.

I was asking Scott.
What are you using for an ECM?

 

[Sebnuts]

Unless you have done major “breathing “ work to the engine, 19 psi boost is way low. It’s easy to get 24+ on the k04, although it’s not good for the turbo.

ZZP did a remote tune on my LNF with Z54 turbo. 24-25PSI is considered "reliable" with that turbo and engine combo.

 

[Davidljones88]

I was asking Scott.
What are you using for an ECM?

The shop mailed the pcm to get flashed. They mentioned some issue with it being European. I want to say it was bought from zzp. I'm not the original builder.

 

[Scott Geyer]

I was asking Scott.
What are you using for an ECM?

I bought Lonnys, so what ever he had

 

[Gtstorey]

The shop mailed the pcm to get flashed. They mentioned some issue with it being European. I want to say it was bought from zzp. I'm not the original builder.

I wouldn't expect to get any good numbers from a one and done tune if you are running an LNF based ecm. They really don't work that way.

 

[Scott Geyer]

If you are close to West Michigan, I highly recommend taking it to ZZP

 

[TheNuker]

Yeah, Like I posted in another thread, My LDK/Z54 and removed balance shafts opal injectors 93 octane did 440hp 411tq. Base line run with "ZZP" canned tune and Z54 was only 336/310. 23PSI.

Nuker-

 

[Davidljones88]

If you are close to West Michigan, I highly recommend taking it to ZZP

Missouri - bit of a drive