Dominicnicklyn's latest activity
-
My service manual for the later models calls the ECM power “ignition voltage” and “battery positive voltage”. -
Dominicnicklyn replied to the thread Project Undertow #388.Your the man, I strive to be knowledgeable like you good sir
-
Red wires on a Cobalt are typically "battery positive voltage" wires, then once they go thru a fuse, are Red wires with a White stripe...
-
Dominicnicklyn replied to the thread Project Undertow #388.I have the pinouts for the ecm conectors, I just can't seem to find anything labeled in the "power" category.
-
Dominicnicklyn replied to the thread Project Undertow #388.Anyone know where the power wire(s) are on the p12 ecm? I want to test and see if I'm getting the voltage I need for the ecm to work...
-
Was looking at 17x9 konig heliogram in bronze. +25 offset. Decided to go 15s for the look. The konigs are pretty light too. I think...
-
17x9 wheels can accommodate 245 to 285 tires - 295 if they are pinched. There are several choices out there in this size, depending upon...
-
http://dfkitcar.com/forum/index.php?threads/tires-and-wheels-list-updated-on-3-25-2020.959/
-
Plasticoat or Plastidip are options to spray coat the wheels rather than stripping and repainting. @Ark :D is a plastic coating expert...
-
I’ve looked at the bronze Konig hyper grams before. Light and look good. I think they have both 17x9 and 17x10.
-
Dominicnicklyn replied to the thread Wide wheel options.9's would suffice for sure, I was just thinking with track days in mind. I could always have them coated in bronze. I'd just hate to...
-
It's about time for me to get serious and get my actual wheel and tire setup. I want r1r's for tires but I'm having trouble finding any...
-
Dominicnicklyn replied to the thread Project Undertow #388.Yes, I was thinking about this while laying in bed last night. I'm starting to belive that I solved the original issue and now I have a...
-
If you can see the bcm and eps all of the time, it’s time to get the wiring diagram and/or pin out for your ECM and confirm everything...
-
Dominicnicklyn replied to the thread Project Undertow #388.yes, when it passes i can. When it passes I can tell when the pedal switches are pressed/released, when it fails I can't
