PyroGuy923's latest activity
-
PPyroGuy923 replied to the thread PyroGuy's 2008 SS Build - #208.They are the DF supplied ones. Painted the parking brake handle and front hubs. Cleaned up and sanded
-
PPyroGuy923 replied to the thread PyroGuy's 2008 SS Build - #208.Which alignment holes do you recommend for normal street driving?
-
PI put several positions so that as you change your caster you could have choices of where to place the steering arm to cut down on bump...
-
PPyroGuy923 replied to the thread PyroGuy's 2008 SS Build - #208.Made some progress over the last week. Front suspension assembled. Gauge Cluster Panel Buttons Wasn't a fan of rivetting...
-
PPyroGuy923 replied to the thread Williamj95 Build.Get a big impact gun. Helped me out tremendously. Bought it mainly for the axle nuts but use it all the time.
-
P;) I may just have to start one, then. Maybe someone can learn from all the mistakes I've made!
-
PAround the end of July of this year, our machine shop had the opportunity to machine four window frame assemblies that were installed...
-
PPyroGuy923 replied to the thread PyroGuy's 2008 SS Build - #208.Progress has been slow lately. Got the hubs separated from the spindles and cleaned up to get power coated. New front tie rods on...
-
PPyroGuy923 replied to the thread PyroGuy's 2008 SS Build - #208.@Ross the circled part to protect the ball joint. Didn't know if there was a particular bellow/boot since the diameter of the tube...
-
PPyroGuy923 replied to the thread PyroGuy's 2008 SS Build - #208.Tie rod question. Is it just the ends that need swapped? I originally thought it was the rods and ends? What do people do for boots on...
-
PPyroGuy923 reacted to Towerdog's post in the thread Towerdog's Indiana Street Goblin Build (#250) 07 SS/SC Donor with
Wow.
Well now it makes complete sense why the car wouldn't go! -
PPyroGuy923 replied to the thread PyroGuy's 2008 SS Build - #208.Friday progress. Got the fuel pump orientation changed, new fuel line made, subframe mounted, and started to press in new control arm...
-
PPyroGuy923 replied to the thread Cheap Bluetooth OBDII scanners.Here's a little screen capture from the Blue Driver live data. Third startup and wanted to make sure radiator and coolant temps worked...
-
PPyroGuy923 replied to the thread Cheap Bluetooth OBDII scanners.Just picked one up and used it for the first time. Happy with it thus far. Liked the live readout on it.
-
PPyroGuy923 replied to the thread Getting real nervous about heat.Think I found my issue. Never connected the stock radiator wire in the connector to the extended one in the harness.