Recent content by Sluggonaut

It was a big challenge for me as well. The biggest issue is always ensuring that the rear frame downtubes align with the subframe. Doing it solo, I always have to use ratchet straps to get the last downtube bolt in, but you definitely need all bolts started and loose to get the motor mounts to...

I used Chris_WNC's solution of screwing a 1/8 npt brass fitting to 1/4 barb into the release port of the surge tank and then running a hose from it under the car. That fixed my mystery fluid on the tank issue that you also seem to be experiencing.

Rally Insurance Group 800-801-1823 The insurance is underwritten by American Modern P&C Insurance Co. as a collector vehicle. Mention Goblin and they'll know what it is.

I have Rally and it's $360 for the year. Full coverage, agreed value at $20k, no race events, and 6k mile limit per year.

The nice thing about the turbo option is that you can add a boost controller. I have a 12 psi setting and a 22 psi setting. I keep it at 12 psi on cold days or if the tires aren't cooperating. I was thinking about adding settings in between, but found at 12 psi I don't have traction issues at...

What size do we need? I don't want to remove my splitter to check. lol

Mine has always been $200-something.

I remember getting an estimate as to when they would ship but I don't think DF had any insight other than when the order to Corbeau was placed. It may have changed since I got my kit in 2022.

The Corbaeu stuff is drop-shipped.

I may have missed the question, but I am curious as to why you would need the title. If we're talking Montana registration you won't need the donor title.

Prior to building my Goblin I would have said pressure bleeding does not require bench bleeding of a new MC. After seeing some of the strange things I did during my build I question whether the knowledge I had going in was knowledge or fairy tales. Bench bleeding removes the doubt that there's...

I read through this thread but didn't see a definitive answer to a couple of questions: Are you following the clutch bleed directions that Lonny has posted or are you stopping after you've pumped it and let it fall as you bleed like you do with the brakes? After bleeding from the MC, you have...

I flat-towed mine to Goblin Fest a couple of years ago, and I used shrink wrap from in front of the cabin to behind the seats. It made it most of the 600 miles down and all of the 600 miles back in one piece. Some of the overlaps came apart on the way down, letting in some debris, but the little...

The coil should not be adjusted based on the tires, it should be adjusted to get the correct suspension setting. Wheel offset or spacers should be used for tire clearance issues.

I had 2 sets of these for moving my donor around in the storage unit I used to tear it down. I now use these with a short 4x4 across each pair to set my Goblin frame on during the winter to keep my soft tires off the cold garage floor. It moves around just as easily this way as it does with the...