Search results

  1. Jmar1622

    Custom STL Files for 3D Printed Goblin Parts

    These are really easy to make out of steel. I made mine with scrap 1/4 on the bottom and tube stock for the mount.
  2. Jmar1622

    VVT disabled?

    You can put a non VVT head on VVT engines as long as it's not 05/06. Reluctor wheels are different from 07 newer.
  3. Jmar1622

    Wanted - Custom Exhaust

    I did put the resonator cone from zzp in my foreverfab exhaust. It was a bit raspy when really getting on it.
  4. Jmar1622

    L61/LAP/LE5

    I have an l61 and would go le5 if I did it again. GM is starting to discontinue l61 parts. Le5 is still in use (slingshot). An 08 l61 can be converted to an le5 somewhat easily but I would just start with an le5.
  5. Jmar1622

    Filling fuel tank problem

    I have tohave the nozzle as far in as possible or it does this
  6. Jmar1622

    Josh's MN Track Goblin #379, 08 LS donor

    Just to beef it up incase I decide to go with more hp. OTTP sleeves, they claim their 200% stronger than stock and able to handle 600hp un supported. No freezing, the old ones pull out and the new ones press in. Ecotec oem style sleeves are very easy to change with the proper tool.
  7. Jmar1622

    Josh's MN Track Goblin #379, 08 LS donor

    New sleeves are in. Now off to the machine shop.
  8. Jmar1622

    Goblin picture game

    It was definitely too close, like causing a few grand worth of damage too close.
  9. Jmar1622

    Goblin picture game

    How about this for a Goblin with police cars?
  10. Jmar1622

    Gas leaking

    Straps are done per the video. Same with the pum0, 1/4" wrench under the ring
  11. Jmar1622

    Gas leaking

    The tank is flexing all over. The side is folding and I installed it per the videos. Dont really like the plastic. I'll look into the rubber gasket. It's just to take up space. I know others have had the same issue.
  12. Jmar1622

    Gas leaking

    I drove the Goblin all last year and it was fine. Had to change the fuel pump and fuel started leaking out from between the pump housing and the tank. Readjusted and the same. Put a cork gasket in with the o-ring and it stopped for a little bit. Now it's doing it again. Any ideas??? It...
  13. Jmar1622

    Josh's MN Track Goblin #379, 08 LS donor

    Held on with bungee. Only thing I had to do was shorten them. Haven't noticed and whistle or flapping yet. I think it's worth it!
  14. Jmar1622

    Josh's MN Track Goblin #379, 08 LS donor

    Back together after the accident and finally wrapped. Shadeidea sun shade works great. I think my tinkering is done for the summer!
  15. Jmar1622

    Replacement front tie rod

    Thank you! I searched and those ones did not come up
  16. Jmar1622

    Replacement front tie rod

    Anyone have the part number or what vehicle the front tie rod ends are for, outer?
  17. Jmar1622

    Minnesota Registration

    Drive to the Monticello one. It was super easy. Declaration of reconstruction is for the inspection if I remember right and the inspection is after unless you want to trailer it. I drove mine most of last year being registered without inspection. Dan hasn't had his inspected and has been...
  18. Jmar1622

    Minnesota Registration

    I went to the Monticello DMV at the recommendation of another. Was super simple. I didn't fill any of that out. They asked questions and made the process easy. Mine is a convertible, valued at $18000, odometer I had set at something like 1000, and yes it's a kit car. They have a special...
  19. Jmar1622

    Need new radiator

    Fan Mounting Kit, Mellbree Electric Radiator Fan Mounting Kit Compatible for Electric Cooling Fan and Transmission Cooler https://a.co/d/6wjwGEg
  20. Jmar1622

    Josh's MN Track Goblin #379, 08 LS donor

    Definitely, I was stressing there maybe damage to the frame and they'd total it.
Top