Is my fuel pump / pump harness different? How do I wire it?

[Dakota8800]

I'm stuck at the end of the following video :
DF Goblin Wiring Harness Guide Part 5 - Organizing the Main Harness, Pt. 2

My fuel pump harness is different. Am I missing a small harness? I believe this is my full fuel pump harness.
Should I cut the wires by my thumb in the second picture and extend the wires to the connector and use that? I noticed the wire colors differ from the video.

I think the separate small harness in the last picture is for the evap system, correct?

Thank you!

 

[Ross]

What is your donor car?

 

[Dakota8800]

What is your donor car?

Oops! 2005 SS/SC From what I understand the fuel pump is different for that year, but I don't know how I would wire it.

 

[Ross]

You don't have access to a GM wiring diagram for your car? My 06 wiring diagram ( Login info. ) probably won't help you, but basically, the wires should remain the same as the GM wiring diagram.

 

[jamesm]

I don't see a full wiring diagram in my stuff but I did find these pinout charts. Although, as Ross mentioned, the fuel pump and sender wiring doesn't actually change aside from the wires being shortened.

 

[Dakota8800]

Subscribed to alldatadiy for my car!

I am a novice at wiring, so please excuse any ignorance.
I think I may be onto something here.
Found what I need for the fuel tank pressure sensor. Editing as I find new discoveries.
View attachment 16376

 

[Dakota8800]

Ahah!
https://dfkitcar.com/forum/index.php?threads/fuel-pump-module-interchangibility.341/#post-3559

My wires are slightly different colors, but this has to be it!
So I think this means I don't use a connector. I separate the wires from the main harness, solder extensions, and solder to the pump.