V1 Jeffrey's City Goblin SS Turbo Illusion Purple

[bradr]

Can anyone tell me what this bottom right wire goes to on the instrument cluster? It looks like its breaking. At the moment the speedometer isn't working and I am wondering if that wire could be the culprit.

That is the illumination circuit from the BCM to the cluster. It simply controls the backlight at night and would not affect your speedo.

 

[JSATX]

Yep speedo is built into the LAN communications it doesn’t have its own wire.

 

[Jlarson524]

Good morning all. Where does the radiator fan wire get connected to in the back near the fuse box?

 

[Jlarson524]

Hopefully it’s F11 because that’s where I cut it and ran it to

 

[Jlarson524]

Finishing up the build. I have put about 300 miles on the car. I am working out a few issues I have such as no back light on dash, No speedometer, and not being able to shift into 5th gear. After all that she is 100% done

 

[JBINTX]

Finishing up the build. I have put about 300 miles on the car. I am working out a few issues I have such as no back light on dash, No speedometer, and not being able to shift into 5th gear. After all that she is 100% done

woof woof
I like the colors and theme!

 

[Zoom Zoom]

Finishing up the build. I have put about 300 miles on the car. I am working out a few issues I have such as no back light on dash, No speedometer, and not being able to shift into 5th gear. After all that she is 100% done

I like your color combination a lot , But I love the puppy dog

 

[Jlarson524]

Does anyone know what the part number is for this nut? Also is there supposed to be something going through it to prevent it from moving out?

 

[ctuinstra]

Does anyone know what the part number is for this nut? Also is there supposed to be something going through it to prevent it from moving out?

You should be able to pick that up at any good hardware store. Use a cotter pin to keep it from backing out. Yeah, that's dangerous not having a pin in there.

 

[Jlarson524]

yup literally almost died last week on the highway. Spun out. Luckily didn't hit anyone or anything.

 

[ctuinstra]

yup literally almost died last week on the highway. Spun out. Luckily didn't hit anyone or anything.

 

[Rttoys]

Daymn

If you want to be doubley sure it won’t come off again, put the cotter pin in and take a flat blade screwdriver and a hammer, and doink the threads. If the nut comes loose, it’ll only go so far.

 

[JBINTX]

Your cotter pins will hold it as is.
You might want to rotate your lower shock end 180 deg. to make it easier to get to the adjustment knob.

 

[Jlarson524]

So I took a long drive and one of the shifter cables completely melted on the exhaust. does anyone have a link for a replacement cable? Or can I just order stock cobalt cables?

 

[Ross]

You are not the first one to melt it. It is a DF supplied part, not a Cobalt part.

 

[George]

I wrap mine in spark plug wire insulation.

Brad

 

[C_Datsun]

So I took a long drive and one of the shifter cables completely melted on the exhaust.

Hey, just checking in to see if you’re still active. #64 found its newest owner, it lives in PA now and spends some time in NYC. Thanks for the beautiful build quality, currently putting my own personal touches on it and enjoying it for the rest of the season.

 

[Rttoys]

The last time he was here was 2021.