Rear wings!

[Robf]

Let's see your rear wings. I'm thinking a universal one just struggling to find one that would be the proper width without too much modifications.

The other option was going the expensive route with
9 lives racing

 

[Ross]

 

[Robf]

View attachment 38950View attachment 38951

View attachment 38952View attachment 38953

View attachment 38954View attachment 38955

View attachment 38956View attachment 38957

View attachment 38958View attachment 38960

View attachment 38961View attachment 38962

View attachment 38963View attachment 38964

View attachment 38965View attachment 38966

View attachment 38967View attachment 38968

Do you know of any that are universal that fit the 29 inch bracket that df supplies? I've been combing through older forum posts and I'm struggling

 

[Waterdriver]

Universal dual element ebay wing used for the front and rear. (Slightly modified) Mounting spacing adjustable.

 

[Mattc3366]

this one is from Wing-Logic

 

[Rttoys]

Stock 06 cobalt ss I made some brackets for and attached it to the rear strut tower

 

[Ark :D]

Some eBay thing

 

[TravMac]

The nine lives wings - 48" front, 71" rear

 

[Joebob]

Some Amazon thing:

0" front, 9" rear

 

[Goblinfanclub1234]

I used an ebay wing with DF's mounts, still need to test it to see if it can help at all.

Pardon Our Interruption...

 

[Robf]

Df wing mount with a $250 Amazon wing. Had to do some modifications to the horizontal mount pieces. I cut off the tabs and added a vertical 1 inch piece and welded the bracket together. When I bought the wing I thought it was going to be absolutely perfect it was close but no cigar.

 

[95Blitz]

DC Money has one of the coolest wings. (I think)

DCMoney's Extended Street Goblin - 06 SS SC - #111 Registered

Thanks everyone!

dfkitcar.com

 

[Robf]

DC Money has one of the coolest wings. (I think)

DCMoney's Extended Street Goblin - 06 SS SC - #111 Registered

Thanks everyone!

dfkitcar.com

For sure that's awesome!

 

[BSinvestments]

winglogic 70" about to install a dual element using a smaller winglogic for the front as well

 

[SmsDetroit]

eBay special

 

[BSinvestments]

I'm new here, but can you share how you got both the front and rear wings mounted? I was going to buy everything 9LR sells, but that's $3200 in awesome parts, that'll be used on a street Goblin... I like the rear wing you chose and would like to see the front one as well, assuming you've finished it by now?

It's pretty simple if you can cut and weld, if you can't weld it's still fairly simple. I had the wing logit mounts welded to the width of the factory df uprights and mounted onto them. For the front wing, I made brackets with simple angle iron and trimmed and cut them to be able to be bolted the the frame. Send me a dm to remind me to take some photos for you.

 

[Gtstorey]

Most rear wings are really for looks only. If they add downforce, it’s where it’s not needed. Not saying a wing can’t be added to do something, but most are strictly for looks. Especially on a street only goblin.

Russell Welding on Washington St can handle the welding part.

 

[BSinvestments]

Thanks man, I'll try to get by there one afternoon this week! I need to also ask them about building a full cage, that I can actually fit in as well. I barely got in/out of Robinjo's a couple years ago, so I don't wanna mess it up and not be able to fit in it afterwards...

How tall, large are you? I’m 6’1” 280. Have a standard chassis that I just made a track frame and have no problem getting in and out. It took some practice, literally. lol. But it’s not bad.

 

[BSinvestments]

I'm 6'5" and 240ish. Did you order the rest of the full cage from DF or make it yourself?

I love your 2nd pic there! Looks so much like an F1 car! That's the look I wanted! May I ask for the specs on your wheels and tires?

I know in another thread you were going to send me pics/info on the front wing/splitter, I think?

I sent them just now. Yep. I ordered from DF. It took some fabrication and sleeving to make it correct. We welded it together and powdercoated it then welded it to the car so only the welded had to be touched up. Overall came out great

 

[Gtstorey]

Pretty sure Robinjo is running stock cobalt seats. Don’t know if they are SS seats or base though.