• We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.

V1 TheDons track, easy entry, 09 ss/tc build #273

Rauq
The difference between the two would be 130 rpms at 60mph on my tires (25" tall), about 5%

I have an SS/SC (4.05) and would prefer the slightly taller gears of an SS/TC trans, but I'd rather have a 4.05 with the LSD than a 3.82 without. Theoretically the taller gears could be better for spooling a turbo but unless you've got a massive turbo the tune's probably got more to do with spool time than a small gearing change.
 
TheDon
Well looks like I'll be getting another cobalt looks like another tear down coming soon maybe be able to make a buck on this one
 
TheDon
Well hear I am with another donor before first frame shows up couldn't pass on the deal 05 ss with zzp header and full exhaust and stage 3 zzp supercharged. Runs drives $800
Looks like it has had a real rough life.
 

Attachments

  • 20210220_125024.jpg
    20210220_125024.jpg
    342.5 KB · Views: 409
  • 20210220_132533.jpg
    20210220_132533.jpg
    515.9 KB · Views: 423
  • 20210220_134025.jpg
    20210220_134025.jpg
    321.4 KB · Views: 424
TheDon
Playing with the trans today. Think I found a used lsd in Ohio if he will ship it, this has got to be better than me fumbling around in mine
 

Attachments

  • 20210228_144127.jpg
    20210228_144127.jpg
    401.6 KB · Views: 394
  • 20210228_153815.jpg
    20210228_153815.jpg
    302.5 KB · Views: 395
Rauq
Playing with the trans today. Think I found a used lsd in Ohio if he will ship it, this has got to be better than me fumbling around in mine
Did you pull it apart with the intent of ending up with an SS/TC 3.82 LSD, as opposed to running the SS/SC 4.05 LSD as is?
 
TheDon
Did you pull it apart with the intent of ending up with an SS/TC 3.82 LSD, as opposed to running the SS/SC 4.05 LSD as is?
1st to 2nd synchro grinds a bit thinking about throwing a new one in, but found a new trans in Ohio with lsd trying to get the guy to ship it to me
 
Rauq
Is this in the original one or your newer one? I thought you picked up an SS/SC for spare parts, including an LSD trans?
 
TheDon
Wasn't an lsd but a good deal so I grabbed it, no clue what I'm going to do with it maybe stick it a porsche that I started a 1.8t swap In, or a friend may build a goblin with it, or sell it? Was originally thinking I could make one out of the 2 but found a deal on a good lsd trans looks like after shipping ill be under 700
 
TheDon
Cleaned and painted trans looks much better engine hopefully looking just as good by end of the week.
 

Attachments

  • 20210314_170126.jpg
    20210314_170126.jpg
    423.7 KB · Views: 373
  • 20210314_170230.jpg
    20210314_170230.jpg
    348.8 KB · Views: 385
  • 20210314_172331.jpg
    20210314_172331.jpg
    493.9 KB · Views: 392
  • 20210314_174035.jpg
    20210314_174035.jpg
    392.3 KB · Views: 400
  • 20210314_174053.jpg
    20210314_174053.jpg
    402.6 KB · Views: 377
TheDon
Here we go again, only a fool sells the wheels first But there was cash. Was running now isn't has code for computer found interesting cable when hooking up scanner
 

Attachments

  • 20210320_123133.jpg
    20210320_123133.jpg
    273.4 KB · Views: 401
  • 20210320_172346.jpg
    20210320_172346.jpg
    493.8 KB · Views: 394
TheDon
Destroyed another rusted out ss today. Now I have more parts to pick from.
 

Attachments

  • 20210327_150913.jpg
    20210327_150913.jpg
    541.7 KB · Views: 363
  • 20210327_161153.jpg
    20210327_161153.jpg
    547.8 KB · Views: 369
Rttoys
More than likely a tracker from a used car dealer. You no pay, you no start. The insurance ones just plug straight into the DLC.
 
TheDon
Wire went up in dash I was told the display in it was over a grand and was missing when I got it one went to where radio would of been and other went to a hole in dash where something was. Also found zzp had programed the computer and ls4 throttle body verifying what I was told about car.
 
TheDon
More sandblasting and painting. new moog bearing going in the arms, wheels and tires ordered, stacks of boxes with parts, feel like I'm almost ready.
 

Attachments

  • 20210329_184822.jpg
    20210329_184822.jpg
    442.1 KB · Views: 376
  • 20210403_191419.jpg
    20210403_191419.jpg
    421 KB · Views: 395
  • 20210403_191406.jpg
    20210403_191406.jpg
    395.5 KB · Views: 395
  • 20210403_191419.jpg
    20210403_191419.jpg
    421 KB · Views: 371
  • 20210410_081128.jpg
    20210410_081128.jpg
    324.7 KB · Views: 374
  • 20210403_191433.jpg
    20210403_191433.jpg
    437.5 KB · Views: 369
  • 20210410_081128.jpg
    20210410_081128.jpg
    324.7 KB · Views: 374
  • 20210410_192931.jpg
    20210410_192931.jpg
    455.2 KB · Views: 375
TheDon
Is this plumed right I've found conflicting stuff on the cobalt forums and it doesn't look factory I thought it was a vacum tank bypass but looked it up and found it to be different if the pics I found were right.
 

Attachments

  • 20210418_152758.jpg
    20210418_152758.jpg
    374.8 KB · Views: 377
Back
Top