Dominicnicklyn
Active Member
I have a 06 lsj for a donor car and before the striping process the car was having some weird electrical/starting problems. The ecm and fuse block housing was just floating around in the engine bay because there was no mount/support for it. When you turned the key into the on position the gauges would move but the only light that would light up on the dash was the anti theft, but it would turn off after 5 seconds like all of the other lights would normally. No click no crank when turned all the way. I did the relearn procedure and the other quick problem solvers.
It was a budys car and I've seen it run a while back.
I decided to strip the car down and check connections along the way. Nothing unusual or out of the ordinary. I fully stripped the harness and I'm about to combine them so I should be able to try to solve the issue soon if it wasnt corrected in the striping process.
Any ideas or similar experiences?
It was a budys car and I've seen it run a while back.
I decided to strip the car down and check connections along the way. Nothing unusual or out of the ordinary. I fully stripped the harness and I'm about to combine them so I should be able to try to solve the issue soon if it wasnt corrected in the striping process.
Any ideas or similar experiences?