Scott Geyer
Well-Known Member
Any suggestions on a good performance muffler?
Im "planning" on splitting to two pipes then into two street bike mufflers.Some people want to be different.
I cut up a motorcycle muffler (2000 ninja 600) and made an adaptor to fit the goblin. I currently have the stock goblin muffler on now, due to a “mishap” to my other one, involving a little too much packing and an explosion, due to too much back pressure. It’s a fun beer story.
What I have drawn up in my head and my fabrication skills are 2 different things. I’m still going to try again though.Im "planning" on splitting to two pipes then into two street bike mufflers.
I think I will play with steel mandrel bends first then once I like it go with stainless.What I have drawn up in my head and my fabrication skills are 2 different things. I’m still going to try again though.
I haven't seen on of those since high school - which was a REALLY long time ago.
You still using this? Do you have a video of your exhaust setup? Curious how it sounds lol.Some people want to be different.
I cut up a motorcycle muffler (2000 ninja 600) and made an adaptor to fit the goblin. I currently have the stock goblin muffler on now, due to a “mishap” to my other one, involving a little too much packing and an explosion, due to too much back pressure. It’s a fun beer story.
Whistle go WOOWOO!
Ror. I found the dipstick. It landed in the passenger seat. HahaNo. After Russell @Rttoys tells you where his dipstick ended up you will understand why…. :0
A good piece of stained oak behind what remains of the muffler would make a nice wall mounting of it for the shop............Ror. I found the dipstick. It landed in the passenger seat. Haha
I used it for a while. It was a little louder than the stock DF one, so one day I decided to add packing to quiet it a little. Something happened and I plugged the exhaust, causing a ton of backpreuure until it exploded, sending the internals to the muffler everywhere and the oil dipstick shooting out the front, along with oil.
It’s on my bench in “reconstruction” phase. Haha