Speedysalazar
Member
So I’m working on the goblin hardness and was working on the dash hardness, but noticed I’m missing one of the connector to the brake switch. Also noticed that I have a yellow wire and a red wire not connected to anything and looks like it was pulled out of possibly the missing connector or 2. The yellow wire was one of the wire that I had to label as (starter relay control). Oh and found that the hazard switch was also missing it’s connector. Please help
Donor is 2006 cobalt SS SC
Donor is 2006 cobalt SS SC
Attachments
-
279.1 KB Views: 87
-
191.3 KB Views: 82
-
286.7 KB Views: 88
-
239.9 KB Views: 90
-
189.9 KB Views: 82
Last edited: