Water line problem

[dvldawg]

I’m trying to install a new exhaust header and it is hitting the line coming off the water pump. Any way to turn this line to gain mor clearance?

 

[CaptFrank2001]

It sits in an "O" ring on each end. I had the same problem with my headers & just turned it about 10 degrees to clear the headers. There is a tab on the pipe that fits into a notch on the left side. I bent it over to rotate the pipe just enough to clear the headers. Hoping for no issues when I run the engine for the first time. Should be fine.

 

[dvldawg]

Thanks, you had the information I needed.