V1 .DWG file for the button panels??

[ColoradoCryptoTrader]

finished dash ready to drop in. it *should* fit in there perfectly. I brushed the aluminum to save cost for now.

I anticipate using my horn a lot LMAO.

 

[Rauq]

What are the intercooler inlet and outlet areas for?

 

[Gtstorey]

Banging his knuckles when he shifts?

 

[Ghostknife]

What are the intercooler inlet and outlet areas for?

digial readout for Temp differential?

 

[Ark :D]

I think you're going to end up moving that horn. When you're all strapped in, you're not going to be able to reach that (easily), unless you're a sasquatch.

Looks great though!!

 

[Gtstorey]

That's about where my horn is, but I don't know when the last time I used a horn in any of my vehicles. I just stuck it on before I had it registered in case I had to do an equipment/safety inspection to get it registered.

 

[JBINTX]

finished dash ready to drop in. it *should* fit in there perfectly. I brushed the aluminum to save cost for now.

I anticipate using my horn a lot LMAO.

View attachment 29514
View attachment 29515

The donor Cobalt gauges do not do the rest of the panel justice!!..... :/
Nice execution on the dash.

 

[ColoradoCryptoTrader]

If I have to redo this after some road testing that is cool, this should be a good starting point. The intercooler inlet and outlet temp gauges are probably a waste of effort, but I am going to do some testing and see how well the rear mount intercooler works.

 

[k.rollin]

The donor Cobalt gauges do not do the rest of the panel justice!!..... :/
Nice execution on the dash.

I started working on a custom gauge face panel for mine after seeing the stuff from revlimiter for the Miatas. Just have to get (a lot) more familiar with inkscape first.

 

[ColoradoCryptoTrader]

The dash panel cost me $70 to get made on sendcutsend, not too bad!! if it hits my hand in 3rd gear ill be sad.

 

[ColoradoCryptoTrader]

let the record show that there is plenty of room to shift all of the gears with this panel. I also have the threaded shift knob screwed directly into the shift lever. have to change the gauges to F still. horn is also easy to reach while sitting back.

 

[OptimizePrime]

Steering wheel lookin' BEEFY. This project turned out looking noice.

You going to use oil pressure in the open slot?

Thanks for the link on the button plates those look great!

 

[ColoradoCryptoTrader]

Steering wheel lookin' BEEFY. This project turned out looking noice.

You going to use oil pressure in the open slot?

Thanks for the link on the button plates those look great!

I think down the road I'll switch to an external oil cooler and add oil pressure gauge. Future upgrades!

also the angle of the picture is misleading, there is a ton of space between the wheel and the dash.