Goblin Front Splitter Group buy

[Rttoys]

It’s like I already knew this information.

 

[SmsDetroit]

Can people post how they mount theirs once they get them.

 

[Mahkoi]

Can people post how they mount theirs once they get them.

I planned on sharing some pics. If my plan works I may have left over hardware I can pass your way. I'll let you know how it goes.

 

[SmsDetroit]

I planned on sharing some pics. If my plan works I may have left over hardware I can pass your way. I'll let you know how it goes.

I was thinking of adding support cables.

 

[Markm]

I was thinking of adding tether cables so when the wife hits something it won’t be a large throwing star

 

[SmsDetroit]

Am I remembering correctly that we need to reverse the fan on the inner cooler and add a hood scoop on the bottom of the splitter?

 

[95Blitz]

Order placed.

 

[Rttoys]

Am I remembering correctly that we need to reverse the fan on the inner cooler and add a hood scoop on the bottom of the splitter?

I switched mine from pull to push when I had the cutout and scoop.

 

[KSLunsfo]

I switched mine from pull to push when I had the cutout and scoop.

Did you flip the blades around on the fan or just reverse the polarity?

 

[Markm]

Anyone have the source/size for the naca ducts? I got the wife a good used heat exchanger with the plenum but no naca ducts

 

[Rttoys]

Did you flip the blades around on the fan or just reverse the polarity?

I bought another fan. used the spal first, then the perma-cool. both worked fine, the perms-cool is reversible, so if you change things in the future, it’ll still work.

Spal 7.5 pusher fan ic rad SPU-IX-30100393

Perma-cool 8” push or pull 19128. Stronger than spal

 

[Sluggonaut]

Anyone have the source/size for the naca ducts? I got the wife a good used heat exchanger with the plenum but no naca ducts

This is the one I ordered when I needed to replace one. It's an exact match to what I received in DF's kit.

 

[Markm]

This is the one I ordered when I needed to replace one. It's an exact match to what I received in DF's kit.

Thank you sir

 

[talon2006]

Talons Garage on Instagram: "Back home from united by bronco and putting the laser to work! This is the front splitter for a DF Goblin being cut!"

13 likes, 0 comments - talonsgarage on March 6, 2024: "Back home from united by bronco and putting the laser to work! This is the front splitter for a DF Goblin being cut!".

www.instagram.com

Started production on the splitters! Looking forward to getting them out the door!

 

[SmsDetroit]

Here’s to hoping they get here soon

 

[MattyP]

Talons Garage on Instagram: "Back home from united by bronco and putting the laser to work! This is the front splitter for a DF Goblin being cut!"

13 likes, 0 comments - talonsgarage on March 6, 2024: "Back home from united by bronco and putting the laser to work! This is the front splitter for a DF Goblin being cut!".

www.instagram.com

Started production on the splitters! Looking forward to getting them out the door!

Think I missed the signups, I DMed you!

 

[talon2006]

Think I missed the signups, I DMed you!

Pm’d you back. If there is a few who missed the link we can get you on today/tomorrow if you email us.
I will be traveling tomorrow to get a new piece of equipment, but if you email [email protected] my wife can get you taken care of.

 

[talon2006]

Here’s to hoping they get here soon

I am hoping to bend them Friday. Hopefully also get them packed and shipped early next week. There are a few orders that came in later, and will be cut starting next week. I decided to move up production on those who ordered over the weekend instead of waiting till next week to cut all of them.

 

[gofast]

I'm in no hurry, so mine can be sent last if that helps someone else get theirs sooner.

 

[Rttoys]

That’s a lot of splitters