V1 Josh's MN Track Goblin #379, 08 LS donor

[Jmar1622]

Here is the vent door and frame. I just reversed the door so the wires run on the inside of the door when mounted. The size of the door and frame is set for fitting roughly inside the finished fiberglass scoop and might need to be adjusted for final fit into whatever you create.

 

[Jmar1622]

Here is the foot scoop and the two piece mold. Again I just reversed them for the passenger side.

 

[Chris_WNC]

Thanks for sharing!

 

[Jmar1622]

This should be the complete list of items I purchased for this project, minus the fiberglass materials.

https://www.amazon.com/dp/B089CFST2X?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 wire
https://www.amazon.com/dp/B08RBWX2GL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 buck adaptor
https://www.amazon.com/dp/B09YRKRCJC?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Splitter
https://www.amazon.com/dp/B0C3QM5ZHP?ref=ppx_yo2ov_dt_b_fed_asin_title Development boards
https://www.amazon.com/dp/B09BPX1HNS?ref=ppx_yo2ov_dt_b_fed_asin_title servo wire extensions
https://www.amazon.com/dp/B0988YTLNL?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 RBG buttons x 2
https://www.amazon.com/dp/B07KY8GK5W?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 rods
https://www.amazon.com/dp/B0DTNX78YV?ref=ppx_yo2ov_dt_b_fed_asin_title servo x 2
https://www.amazon.com/dp/B07FW18RQY?ref=ppx_yo2ov_dt_b_fed_asin_title small bearings
https://www.amazon.com/dp/B07TJ8M238?ref=ppx_yo2ov_dt_b_fed_asin_title servo arms
https://www.amazon.com/dp/B0D8T53CQ5?ref=ppx_yo2ov_dt_b_fed_asin_title Arduinos

 

[Rttoys]

Go Charlie. He’s better at making things than avoiding things……like stairs.

 

[Jmar1622]

Go Charlie. He’s better at making things than avoiding things……like stairs.

Bahahahahahaha

 

[Rttoys]

Zing……

 

[Jmar1622]

2026 annual update...for the most part:

Dip Your Car done. It was pretty easy and turned out well. Not sure on the color, but it will work for a couple years.

New dash and gauges are in. Couple indicator lights aren't hooked up yet and Im thinking I went with the wrong fuel gauge, but I'll get those sorted out.

Also added a fan with vents for those colder days.

Thats it for bigger stuff right now. It go a new steering rack and some wiring changes. Were working on changing the removable panels in the engine cover. Hopefully that will be done soon and finish off the annual update!

 

[Desert Sasqwatch]

Nice!!! Love the dash layout - and you have tunes too!