RobC76
Well-Known Member
- RobC76 Well-Known Member
Chassis 247
Car has 1 mile on it.
Engine LNF Turbo complete running crate engine
Nothing modified other than ZZP stage 1 map sensors
GM performance stage 1 tune
New GM engine side harness
Trans F35 / LSD
(Purchased new from DF kit car)
DF Goblin purchased options:
Standard length chassis
Dual door bars
Center cage bars
Hood / side panels
Headlight Kit
LED tailights
License plate kit
Side mirror kit
Rear wing mounts
Boost gauge
3 piece tunnel cover
Billet shifter
Corbeau seats and harnesses
Racing struts and QA1 springs
Brake proportioning valve kit
Parking brake kit
Turbo exhaust
5x114.3 Hubs
Other Options:
ZZP 4 bar map sensors
OTTP axles
4DTech ABS Emulator
4DTech Goblin Eliminator (Airbag, Seatbelt & Tire Pressure + Bonus Features)
BCM programmed to zero miles
AN lines reservoir to brakes
Aluminum pedal plates
MOOG greasable link bars and tie rods
Very few donor parts on vehicle. Everything that could be bought new was purchased.
Steering rack
Steering shaft
Brake booster
Brake master cylinder
Brake reservoir
Clutch master cylinder
Control arms and bushings
Coolant reservoir
Fuel pump module and fuel pump
Electronic throttle
Clutch and brake switches
Belt, hoses, lines
Used from Donor:
ECM
Main / body harness / reworked
Electrical fuse box / cover
BCM
Ignition switch
VATS or keyless entry module
Pedal box, pedals
Rear uprights
Some misc. bolts and hardware
Wheels are 0 mile 2025 Mustang GT new takeoffs with continental tires
Wheels are 5x114.3
Alignment done by 30 year veteran at a local suspension / alignment shop.
I’ll get pics and videos of car next week and probably list it. Going to start working on my other V1 / LNF. Have a V2 on order and don’t really need 3.
Looking for some opinions on value. Would appreciate any feedback. PM me if you would rather. Thanks Goblin Family!
Car has 1 mile on it.
Engine LNF Turbo complete running crate engine
Nothing modified other than ZZP stage 1 map sensors
GM performance stage 1 tune
New GM engine side harness
Trans F35 / LSD
(Purchased new from DF kit car)
DF Goblin purchased options:
Standard length chassis
Dual door bars
Center cage bars
Hood / side panels
Headlight Kit
LED tailights
License plate kit
Side mirror kit
Rear wing mounts
Boost gauge
3 piece tunnel cover
Billet shifter
Corbeau seats and harnesses
Racing struts and QA1 springs
Brake proportioning valve kit
Parking brake kit
Turbo exhaust
5x114.3 Hubs
Other Options:
ZZP 4 bar map sensors
OTTP axles
4DTech ABS Emulator
4DTech Goblin Eliminator (Airbag, Seatbelt & Tire Pressure + Bonus Features)
BCM programmed to zero miles
AN lines reservoir to brakes
Aluminum pedal plates
MOOG greasable link bars and tie rods
Very few donor parts on vehicle. Everything that could be bought new was purchased.
Steering rack
Steering shaft
Brake booster
Brake master cylinder
Brake reservoir
Clutch master cylinder
Control arms and bushings
Coolant reservoir
Fuel pump module and fuel pump
Electronic throttle
Clutch and brake switches
Belt, hoses, lines
Used from Donor:
ECM
Main / body harness / reworked
Electrical fuse box / cover
BCM
Ignition switch
VATS or keyless entry module
Pedal box, pedals
Rear uprights
Some misc. bolts and hardware
Wheels are 0 mile 2025 Mustang GT new takeoffs with continental tires
Wheels are 5x114.3
Alignment done by 30 year veteran at a local suspension / alignment shop.
I’ll get pics and videos of car next week and probably list it. Going to start working on my other V1 / LNF. Have a V2 on order and don’t really need 3.
Looking for some opinions on value. Would appreciate any feedback. PM me if you would rather. Thanks Goblin Family!
