V1 Supercharged cobalt pre build

[Acewest]

Hey does anyone know what I need to do to my 2006 supercharge motor before I install it in the kit body. I watch the build video but it’s not a supercharged model. Besides the AC. What else should I eliminate from the harness or the motor?

 

[Ross]

I don't remember eliminating much from my 2006 SC donor. Just these 2 little things:
- The vacuum hoses on the top, and a solenoid.
- removed the extra fan wire & connector that use to go to the radiator.
I bought the DF solid mounts for the engine, as the transmission mounts were solid, it didn't make sense to have rubber engine mounts.

 

[baustin]

Also an 06 SS SC here. Things I removed: evap canister (wires plugs are still there), aluminum tape over the AC condenser ports, 1 plug is unused from the AC condenser area but I just left it and covered it. I covered the other radiator fan plugs, didn't remove.

 

[Acewest]

Awesome. Thanx. Anyone attacked the whole wiring harness them self ?

 

[Acewest]

Just waiting for the kit now.

 

[Ross]

Awesome. Thanx. Anyone attacked the whole wiring harness them self ?

Yes, I followed the early videos (95% applies to my SC car), and did my wiring harness. You can do it too.

 

[Acewest]

I really wanna try it too.