V1 tool list

[Rttoys]

The new ones are Allen head.

That’s good. I bought those to replace what I have, but didn’t feel like cutting, grinding and welding the new ones in. Maybe one day I’ll do it though.

 

[Mahkoi]

And some flat plate, cut thick to turn the quick disconnects for the hood.

I used to be a boat mechanic so it looks like I may have a use for this screwdriver again on those hood fasteners

 

[Rttoys]

The only downside to that tool is, there’s not enough room to get it under the car. You are only working with about 5”.

 

[k.rollin]

The only downside to that tool is, there’s not enough room to get it under the car. You are only working with about 5”.

You have 5" of ground clearance in the front? I only have about 3.5"

 

[Rttoys]

Ya. It’s probably more like 4. Not a lot of room either way.

 

[Rttoys]

Gonna pimp a tool I have used a lot more than I thought I would; Four Uncles oil extractor. You send the tube down the oil dipstick tube, pump the handle and it pulls the oil out. Replace the filter and bam, you‘re done. It works great on the wifes Audi because the filter is on top, which is basically the same as the ecotec engine and even forklifts. It also has brake bleeder attachment that works well bleeding brakes and clutch and stuff. For $60, it’s well worth it.

 

[Rttoys]

I need to add oil filter tools to this.

Robinjo uses this ratchet wrench on his LSJ

Amazon.com

I use this socket set for multiple applications

https://www.lislecorp.com/specialty-tools/filter-fuel-and-oil/5-pc-filter-socket-set

https://www.lislecorp.com/media/products/13300_21452AB681ADA.jpg?format=webp