KLMOTORSPORTS
Well-Known Member
- KLMOTORSPORTS Well-Known Member
Does anyone know the stock length of the Turbo Axles (from back of hub to axle seal)? Thanks!!
Ken
Ken
-
We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.
Turbo axles length (stock)
KLMOTORSPORTS
Well-Known Member
- KLMOTORSPORTS Well-Known Member
Anyone have a set of Turbo axles laying around?
RouteAbel
Well-Known Member
- RouteAbel Well-Known Member
I took pictures of mine which came from a ragged out 2010 turbo donor. Notice how one axle is about 1.5-2 inches longer than the other.
I have read that new axles are shorter because they un-compress. Mine may be different ages because my donor was wrecked and then repaired (poorly) and then wrecked a 2nd time. So maybe that explains the difference in length but you can see it in the boot that it is stretched out. The shorter one measures 24 5/8 inches.
The other one including the axle rod or transaxle or whatever that extra bar is called, measured 40 +1/2 inches.
Hope that helps.
I have read that new axles are shorter because they un-compress. Mine may be different ages because my donor was wrecked and then repaired (poorly) and then wrecked a 2nd time. So maybe that explains the difference in length but you can see it in the boot that it is stretched out. The shorter one measures 24 5/8 inches.
The other one including the axle rod or transaxle or whatever that extra bar is called, measured 40 +1/2 inches.
Hope that helps.
KLMOTORSPORTS
Well-Known Member
- KLMOTORSPORTS Well-Known Member
Would you be able to compress both axles and measure from the points in the picture I attached (from the end that butts up against hub to end that butts up against transmission)...need measurement with axles compressed.
Really appreciate your help!!
Really appreciate your help!!
KLMOTORSPORTS
Well-Known Member
- KLMOTORSPORTS Well-Known Member
Awesome, thank you very much!
