Karter2026
Goblin Guru
I was just thinking about something similar today. But keeping the stock cluster. But an aluminum panel up the center for my Boost/ vac, afr, and a marine stereo controller.
Dash is looking sweet.yeah, totally doable. But the tach being on the far side has always bothered me.
but you could totally keep the original IC and then get a cheap LED rev light strip for racing placed above steering wheel and that would be perfectly acceptable.
Do you have a side view picture of the new windshield frame? I am interested to see how close the steering wheel is.
Looking great!
So are you planing on a v shaped flat glass?it’s not very close. Hard to tell but there’s about a foot of space in front of the wheel
View attachment 11120View attachment 11121
while the frame is fairly V shaped when I bend the Lexan over it it’s pretty smooth. Not going to be creased or two piece or anything like that. I’m also planning on adding a radius bar along the bottom to further shape and smooth it.So are you planing on a v shaped flat glass?
Oh that's right I forgot that you can use Lexan and not safety glasswhile the frame is fairly V shaped when I bend the Lexan over it it’s pretty smooth. Not going to be creased or two piece or anything like that. I’m also planning on adding a radius bar along the bottom to further shape and smooth it.
I would be interested in getting a block off plate for my goblin. Can you sell me one?Let me know what you think. Takes two seconds to unplug. If you want a cap I’ll send you one
Sure just PM me your addressI would be interested in getting a block off plate for my goblin. Can you sell me one?