PHENDERSON
Well-Known Member
Crap...that is going to be hard to reach!
Sounds like you just bench-bled the master cylinder the hard way. As long as you got fluid out of each corner and did so until no more bubbles then everything is fine.I applied vacuum on the bleeder with pressure at the other end and it worked.
It's not a good feeling. I am getting a no-crank condition now and it ran just fine before I bled the brakes/clutch and wired in all my lights/gauges.Or even worse absolutely nothing happens when I turn the key.
Grounds. It’s always the grounds. LolCheck your grounds, engine to body harness connector, and the fuse box positive cable @Sluggonaut