Machine1515
Member
I have been sitting on these parts for 2 years. But sadly it looks like I will not be getting to build a V1 Goblin. I am hoping that this will help someone else get to building one quicker.
I am listing the following for sale as a 'take it all'. $2600. I live in the Cleveland area.
-LNF Engine - New camshaft position solenoids, exhaust camshaft position sensor, hoses
-Completed wiring harness done with Tessa tape. Headlights are wired for fog and turn. Also includes RCA and speaker wiring for an amp and speakers
- Lightweight flywheel - needs new friction plate (HS9587T) from Aasco motorsports
-Fuel pump and ignition have already been modified to go into the Goblin
-Clutch Masters FX300. Test fit but not used.
- Subframe, steering rack and sway bar
-Brand New, still in the box F23 from DF
-Brand New, still in the box K04 turbo (not Borg Warner)
-Parts shown on the bench have all been sandblasted and coated in Boeshield T-9. All of the bolts have been cleaned up as well (bucket of bolts next to the engine are left over bolts from the donor. All usable bolts are separated and labeled)
-Fuel filler neck is powder coated black and the e-brake and pedal box are spray painted black
-New intake and exhaust gaskets
-Valve cover valley cover that has Turbocharged engraved in it, black
I have the bill of sale from these parts but no title. Engine is unknown miles.
Items missing include: Axles for the F23, spindles and brake calipers, a few exhaust studs and bolts, needs a new camshaft sensor pigtail
I am listing the following for sale as a 'take it all'. $2600. I live in the Cleveland area.
-LNF Engine - New camshaft position solenoids, exhaust camshaft position sensor, hoses
-Completed wiring harness done with Tessa tape. Headlights are wired for fog and turn. Also includes RCA and speaker wiring for an amp and speakers
- Lightweight flywheel - needs new friction plate (HS9587T) from Aasco motorsports
-Fuel pump and ignition have already been modified to go into the Goblin
-Clutch Masters FX300. Test fit but not used.
- Subframe, steering rack and sway bar
-Brand New, still in the box F23 from DF
-Brand New, still in the box K04 turbo (not Borg Warner)
-Parts shown on the bench have all been sandblasted and coated in Boeshield T-9. All of the bolts have been cleaned up as well (bucket of bolts next to the engine are left over bolts from the donor. All usable bolts are separated and labeled)
-Fuel filler neck is powder coated black and the e-brake and pedal box are spray painted black
-New intake and exhaust gaskets
-Valve cover valley cover that has Turbocharged engraved in it, black
I have the bill of sale from these parts but no title. Engine is unknown miles.
Items missing include: Axles for the F23, spindles and brake calipers, a few exhaust studs and bolts, needs a new camshaft sensor pigtail
Last edited:
