So a couple things.
Here is a picture from Adam's "handy photos" gallery, of a completed SS/TC Goblin.
I am looking at the same region of my engine, and a few questions come to mind.
First, the BLUE circle: According to my Google-Fu, this is a MAP sensor.
I have an identical sensor hanging down, near where the A/C pump was, with the exact same Bosch part number on it; I presume this is the MAP sensor that is positioned in the "TC Tube for MAP", in the image of the finished SS/TC Goblin above. *edit* I just noticed, it's barely in the picture ... but it's slightly below the bottom edge of the image and to the right. Correct?
Next, the RED circle: In the pic of the finished TC above, this sensor is unplugged, and it looks like the port is filed off/missing. I presume I should do the same with mine?
Now, the YELLOW circle: I am having difficulty figuring out where the nylon vacuum hose from the front end of the Goblin is supposed to connect to. I think the circled port should have a vacuum hose attached to it, and then the vacuum hose should run to the nylon tube, and they should be joined with a tight hose clamp. Yes/no?
Finally, I have a line labeled "To turbo IC loop". I believe that line connects to the MAP tube, and is pictured in the image of the finished TC car, right above the MAP sensor. Is that correct?
Whew. Thanks people.