Extra (likely trivial) parts

[duthehustle93]

I believe these are mostly trivial or leftover from the PO's additions, but I'm nearing my first start (finally!!!) and I just wanted to check if anybody knew what these were, and if they're important at all.

10MM wrench for rough scale.

1: This looks like an upper isolator for a coilover spring, but I only have 1. I'm 99% sure this is trash.
2: Steel spacer. ID 0.58", OD 0.88", length 0.47". I only have one.
3: I think these are the most likely to be important. These are turned delrin(?) spacers with an ID that appears to be a clearance hole for a 5/16 bolt. ID is .328, OD 1", 1.41" long.
4: Seems like an ebay mount kit for something... I'm 99% sure this is trash.

 

[TravMac]

The black delrin type material spacers I believe were to space up the shifter from the tunnel (I'm pretty sure I just removed these on my car for the upgraded shifter last month). The metal spacer looks close to one of the transmission/engine mount spacers, but i think the id for those was tighter. Might be worth double checking those on your car.

 

[duthehustle93]

Good call on the shifter! I found some pictures and that looks to be correct.

I just looked up the trans/engine spacers and this old kit uses a different mount for the engine/trans and doesn't use those spacers, so unfortunately that's not it. As you mentioned it's also a bit big for that.

 

[ah.b.normal]

Good call on the shifter! I found some pictures and that looks to be correct.

I just looked up the trans/engine spacers and this old kit uses a different mount for the engine/trans and doesn't use those spacers, so unfortunately that's not it. As you mentioned it's also a bit big for that.

I second the plastic shifter spacers, I looked at a set under a shifter today. I had forgotten what they looked like.