V1 MJP61 Street Goblin - 10 LS Donor - #297

[MJP61]

Thanks. That’s what I figured. But my car is an automatic. I’ll just cut it off.

 

[SmsDetroit]

Thanks. That’s what I figured. But my car is an automatic. I’ll just cut it off.

If wait to cut it off just in case I’m wrong

 

[Ross]

You are right, SmsDetroit, it is for the clutch.

 

[MJP61]

Thank you Ross and SMS. I emailed Adam to confirm, so I will wait to cut it off.

 

[MJP61]

What is this piece? I’m not sure which bag it came in. I think it might be something for the shifter. I have an Automatic.

 

[Joebob]

What is this piece? I’m not sure which bag it came in. I think it might be something for the shifter. I have an Automatic.
View attachment 25081

It is the new shift linkage for the automatic. You remove the white plastic rod and replace with that linkage and aluminum spacers.

 

[Jareth]

Thank you Ross and SMS. I emailed Adam to confirm, so I will wait to cut it off.

Did you get a reply from Adam? I ordered a frame for an automatic an I also have that bracket welded on my frame.

.

 

[Joebob]

Did you get a reply from Adam? I ordered a frame for an automatic an I also have that bracket welded on my frame.

.

I have the AT frame mods on my and did not get the clutch bracket. I also have the automatic transmission.

 

[MJP61]

Did you get a reply from Adam? I ordered a frame for an automatic an I also have that bracket welded on my frame.

.

No response yet. I believe they are closed today. As soon as I hear from him, I’ll let you know Jareth.

 

[MJP61]

It is the new shift linkage for the automatic. You remove the white plastic rod and replace with that linkage and aluminum spacers. View attachment 25082View attachment 25083

Thank you JoeBob

 

[Jareth]

Thanks, seems odd that they would go to the trouble of welding something not needed?

.

 

[MJP61]

No response yet. I believe they are closed today. As soon as I hear from him, I’ll let you know Jareth.

I heard back from Adam. That bracket can be cut off for an Automatic car.

 

[Jareth]

Sorry, but now curious if there is any interference or harm in leaving it? I already have my frame painted.

.

 

[Towerdog]

Sorry, but now curious if there is any interference or harm in leaving it? I already have my frame painted.

.

There is no interference for us with clutches... I would leave it in case somewhere down the road you added an F35 or F40 trans.

 

[MJP61]

Sorry, but now curious if there is any interference or harm in leaving it? I already have my frame painted.

.

Only interference is with the footwell cover. You have to modify it to go around that bracket.

 

[MJP61]

Let the build begin!!! Picked up the frame powder coat today.

 

[JBINTX]

If the shop is any reflection, this is gonna be one clean build!!!!!
I have shop jealousy...

 

[MJP61]

Got a little bit done this weekend. Ran hoses through lower frame, installed floor pans, bulkhead and steering rack. Hoses went through with ease using Lonnys method from new video. Had both hoses done in 10 minutes.

 

[Rauq]

Looks good! How'd you get our steering rack so shiny?

 

[MJP61]

Looks good! How'd you get our steering rack so shiny?

Thank you. It’s a new rack. The old one was pretty rough so I bought a new one.