• We've upgraded and reskinned the forum. Notice something off? Email us at [email protected] and we'll fix it.

V1 Ross's extended city, easy entry Goblin- 06 SS/SC, NW Arkansas

Ross
JBINTX said:
Wait one darn second.
You have a trailer hitch on Mad Max and you did not hook up to that carcass on boards on a trailer with it?????..............
Photo OP missed............ :(
Click to expand...
But I already posted that pic with my first donor....
In with the trailer,
28814


Out with the Cobalt shell.
28815
 
Ross
Suede welded mine... but I doubt DF has the bandwidth to do it again. It wouldn't be hard to weld it up yourself, if DF will sell you the pre cut & bent DOM tubing.
 
ncgoblin
Ross said:
Suede welded mine... but I doubt DF has the bandwidth to do it again. It wouldn't be hard to weld it up yourself, if DF will sell you the pre cut & bent DOM tubing.
Click to expand...
I would be interested in a full halo in the future for sure as most tracks require this for track days. It would be great if DF would ship the bended pipes for a conversion.
 
Rttoys
It’s like helmets; they don’t have to be expensive, but do need to have X safety rating, to ensure they are built correctly.

……..and you have to wear it for it to be effective. :p
 
Ross
Good point. Those cheap ones haven't been certified for racing. Not that I am all that serious on racing, as the local autocross won't care, but if I go to a big event they might.
 
k.rollin
JBINTX said:
Good , basic ones are not that expensive.

Amazon.com: RaceQuip Auto Racing Harness Set Camlock 5 Point Pull-Down Lap SFI 16.1 Black 741001 : Automotive

Buy RaceQuip Auto Racing Harness Set Camlock 5 Point Pull-Down Lap SFI 16.1 Black 741001: Wiring Harnesses - Amazon.com ✓ FREE DELIVERY possible on eligible purchases
www.amazon.com
Click to expand...
Those are pull down harnesses. I only mention it because the Goblin is quite small and pull up lap belts are easier to tighten when you don't have help or in tight cabins. Pull down lap belts are great when you have assistance.
 
Ross
So the blue harness has an 11" long strap for the anti-submarine strap, which would work well if my seats had a hole in the bottom for them.
Can I just use this 5 point harness as a 4 point harness, and skip the anti-submarine crotch strap?
When you open a cam lock seat belt, do all 5 straps disconnect? Or does the cam stay with one of the straps? Which one?
29075

I could take my seats apart, and re-upholster them again with a hole in the middle,
or I could buy a strap extension (black strap) and put it under the seat, so the strap would run all the way around the front of the seat.
 
jennam
I still use them as a 5-point when autocrossing even though my seats don't have the hole. The belt release rides up if I don't. I use them as 4 points when cruising around town since I don't tighten them as much.

The release stays with one belt. Seems like it's the right belt for my harnesses.
 
Sluggonaut
Ross said:
When you open a cam lock seat belt, do all 5 straps disconnect? Or does the cam stay with one of the straps? Which one?
Click to expand...

I've only used cam lock harnesses twice, both times as the passenger, and both times the buckle was on the outboard/right strap.

I don't know if driver side straps are the same or different.
 
Rttoys
jamesm said:
I still use them as a 5-point when autocrossing even though my seats don't have the hole. The belt release rides up if I don't. I use them as 4 points when cruising around town since I don't tighten them as much.

The release stays with one belt. Seems like it's the right belt for my harnesses.
Click to expand...
Same here. The 5th holds everything down properly. I just run mine around the seat too.

and yep, one piece stays on the harness.
 
JBINTX
Ross said:
So the blue harness has an 11" long strap for the anti-submarine strap, which would work well if my seats had a hole in the bottom for them.
Can I just use this 5 point harness as a 4 point harness, and skip the anti-submarine crotch strap?
When you open a cam lock seat belt, do all 5 straps disconnect? Or does the cam stay with one of the straps? Which one?
View attachment 29075
I could take my seats apart, and re-upholster them again with a hole in the middle,
or I could buy a strap extension (black strap) and put it under the seat, so the strap would run all the way around the front of the seat.
Click to expand...
Some may chastise you for improperly installing the harness without a fifth strap hole. Ugh.
The fifth strap does help keep the lap belts down on the hips.
Given you have easy entry frame and stock Cobalt belts, anything would be an upgrade! Having ridden in the Mad Max, I thought you were going to throw me out the side.....like your stranger passenger at AutoX......
The Houston Crew says "go with your plan" and then you can use more right foot on the course!!!!........ ;)
 
G
I cut a hole for the 5th strap into my seats. I glued a piece of strong rubber under the vinyl and installed some harness inserts through the hole.
blackrhinoperformance.com

Black Rhino Performance | Seatbelt Harness Inserts

The Black Rhino Harness Inserts allow users to punch through their aftermarket seats and run 4 point harnesses. Perfect for your Polaris RZR, Yamaha Rhino, Kawsaki Teryx or any off road application where custom seats are used.
blackrhinoperformance.com blackrhinoperformance.com
 
You must log in or register to reply here.

Similar threads

L
V1 Levi's Ext Track Goblin #130 06 ss w turbo
Replies
1
Views
253
WA08TC
WA08TC
Xtreme
FS: 2018 DF Goblin. City Easy entry
Replies
3
Views
454
Xtreme
Xtreme
O
2007 Cobalt SS/SC 45K miles, Oregon
Replies
0
Views
331
OR_Cobaltss
O
PIERRE Perea
V1 FOR SALE Extended Goblin V1 - $33k
Replies
1
Views
661
PIERRE Perea
PIERRE Perea
C
V1 Captain Dave's City Goblin #336 - 07 SS/SC Donor
7 8 9
Replies
168
Views
19K
Captain Dave
C
Back
Top