Desert Sasqwatch
Goblin Guru
Looking good! Making some progress and it won't be too long from now that it will be a driver.
Great update! Just a reminder, the donor tie rod ends go in the back and the DFG supplied tie rod ends go in the front. Yours looked opposite. Forgive me if I’m incorrect.Been a while since I sent an update to this page, but I am still here and still picking at it when there is time. The goal right now is to get it on wheels so it is more movable and the space can be freed up up some. The motor is bolted in but not connected. Things are coming together.
I will check that out, thank you for having a sharp eye!Great update! Just a reminder, the donor tie rod ends go in the back and the DFG supplied tie rod ends go in the front. Yours looked opposite. Forgive me if I’m incorrect.
Florida, I have heard both DMV horror stories and stories of the Florida DMV being easier that a car show. I intend to have everything as legal and as right as possible when I go.Yep, that one would work, as it has the SAE DOT stamp on the glass.
Forgive me if I've missed it, but, what state are you located in? The DOT stamp may not even be relevant to you. I speak from the perspective of someone from Pennsylvania, a state which is one of the tough ones to get registered, so the SAE DOT stamp matters a lot to me.
Donor chassis is stripped and ready to be moved out. We dropped the power train and the subframe as a unit rather than the way the video shows so that we can get the chassis cleared out sooner and have better access to the motor and front suspension to strip it. All total I would say we are about 20 man hours into the job. Some of could have gone quicker, but we were in no hurry and wanted to be a good project. Once the chassis is picked up we will have space for the kit which should be here next week.
View attachment 3957View attachment 3958View attachment 3959View attachment 3960
Hi there. Just curious how close you are on your build. I am in Bushnell/Nobleton, about a 1/2 hour from Inverness and would like to see your progress. I am about two weeks away from delivery .Florida, I have heard both DMV horror stories and stories of the Florida DMV being easier that a car show. I intend to have everything as legal and as right as possible when I go.
We are a bit more than half way through, but it is looking more like a car now. You or anyone in the Central Florida area is welcome to drop by the car is at my machine shop in Inverness.Hi there. Just curious how close you are on your build. I am in Bushnell/Nobleton, about a 1/2 hour from Inverness and would like to see your progress. I am about two weeks away from delivery .
Can you pm me your address?We are a bit more than half way through, but it is looking more like a car now. You or anyone in the Central Florida area is welcome to drop by the car is at my machine shop in Inverness.
I like it ! Is that and m6 with a 10mm nut insert ?Another simple print. basic brake line clip. thingieverse file - https://www.thingiverse.com/thing:3978954