V1 Ben Peter's Track frame 07 SS sc Goblin (NH)

[JeffsGoblin]

Do some research on painting and powder coating manifolds and SCs. Some say it will create / hold heat and that would be bad for performance.

 

[BaltimoreHokie]

Do some research on painting and powder coating manifolds and SCs. Some say it will create / hold heat and that would be bad for performance.

Hmm. Thanks I'll look into that.

 

[Tony]

That Gambler looks excellent!

 

[Ben Eldridge-Peter]

 

[BaltimoreHokie]

Jealous. Looks like you've got a lot of goodies

 

[Ben Eldridge-Peter]

I have an Engine disabled code with my new pcm from zzp but otherwise it tries to start with the old one in, i think it doesnt due to the 60# injectors anyone else have trouble with this?

 

[ctuinstra]

I have an Engine disabled code with my new pcm from zzp but otherwise it tries to start with the old one in, i think it doesnt due to the 60# injectors anyone else have trouble with this?

I doubt very highly the injectors have anything to do with it. There is no place for the ECM to even “know” what injectors are in it. The only thing is just the flow rate. There is something wrong with it. ZZP should make it work for you.

 

[Ben Eldridge-Peter]

Im having trouble with my car starting And computers not communicating. and i just found that i mixed purple wire at pin 4 and purple wire at pin 58 up. pin 58 being low reference idk what to do about that or how it will affect things. also i need to straighten out the dimmer switch circuit. im not sure how to figure out how that low reference circuit will effect things.

 

[BaltimoreHokie]

any update?

 

[Ben Eldridge-Peter]

Yeah I'm having electrical issues havent been working in my non heated garage.

 

[BaltimoreHokie]

Gotcha. I'm in NH for work and remembered you were around. I'm about an hour away. Not sure how much time I have to stop by though. Looks good. Did you get it started.

 

[Ben Eldridge-Peter]

No it turns over and gets fuell but doesn't fully start I have many hours into the issue with a freind last fall, and have not messed with it in months.

 

[BaltimoreHokie]

No it turns over and gets fuell but doesn't fully start I have many hours into the issue with a freind last fall, and have not messed with it in months.

I noticed you had the ZZP kit. Did you already send you computer to them? Wonder if it's the tune.

 

[Ben Eldridge-Peter]

Yes the first tune they did was completely incompatible they sent me a new one that worked much better.

 

[Lonny]

I wonder if you could find someone near you that would let you put your ECM in their car long enough to see if it will run. If not you could ship it to us and we can test it.
This will at least eliminate one possibility.
If you think it is your wiring harness give me a call and we will see if we can find a solution.
214-334-0232

 

[IDRVSLO]

I wonder if you could find someone near you that would let you put your ECM in their car long enough to see if it will run. If not you could ship it to us and we can test it.
This will at least eliminate one possibility.
If you think it is your wiring harness give me a call and we will see if we can find a solution.
214-334-0232

Awesome!

 

[Brian74]

Do you have a scanner? If so, are you able to pull any codes or data from the ECM?